Sarp
I just noticed on the facebook page it was last stated as a scarpar being IP 55 rating on the electronics, so fairly splashproof but not submersible, would it be an issue if the electronics were to "get wet" and would it be user serviceable to get it going again?
That aside, how is the rest of the system? Like im guessing these things will be build like how you would expect of a dirt bike, you dont see people worrying about getting them muddy or sandy or wet but there is still things like chain links, bearings (although sealed) moving sections, pivot points ect that can cop some wear from undue grittiness and wear them out fairly quickly. Since these things will only be um, basically zero off the ground and will therefore be almost constantly subjected to all of that and at higher levels is there anything that can really wear from excessive sand / mud thunderings?
I know you guys have it all under control im more just curious and the forums are all but dead quiet (its like the lul before the storm) so i thought id throw you something out of interests sake.
Also if, saay, the electronics were waterproof would the rest of the system be cool under that big puddle / small stream as i power across?
otherwise im just gonna have to see if i can aqua plain one of these babies, i cant wait to try that!
Scarpar Forums » Product Questions
-
Posted 5 months ago #
-
WASUUUUUUUUUUUUUUUUUUUUUUP<div><cite>-Aj- wrote:</cite>Sarp</div>
Ok ... back to the question ... and thanks ... we'll do our best to answer it with the information we have remembering prototyping will change stuff ...
<div><cite>-Aj- wrote:</cite> I just noticed on the facebook page it was last stated as a scarpar being IP 55 rating on the electronics, so fairly splashproof but not submersible, would it be an issue if the electronics were to "get wet" and would it be user serviceable to get it going again? </div>
Well, it's not really designed to 'go under water' (or aquaplane ... although if you do we'd love some footage <img src="./images/smilies/icon_e_wink.gif" alt=";)" title="Wink" /> ) ... user serviceable ... not really if you damage the electronics ... the motor controllers are 'programmed' so if you short the system, you are probably going to be headed back to your nearest dealer. It'll have a recommended 'wade depth' which will be below the point where you risk damaging stuff ... if you decide you want to use your new ePSB as a submarineyou can still get it fixed but it's likely to be outside warranty. We just can't make it 'water proof' ... at least for now.
<div><cite>-Aj- wrote:</cite> That aside, how is the rest of the system? Like im guessing these things will be build like how you would expect of a dirt bike, you dont see people worrying about getting them muddy or sandy or wet but there is still things like chain links, bearings (although sealed) moving sections, pivot points ect that can cop some wear from undue grittiness and wear them out fairly quickly. Since these things will only be um, basically zero off the ground and will therefore be almost constantly subjected to all of that and at higher levels is there anything that can really wear from excessive sand / mud thunderings?</div>
The tracks assembly is designed to be fairly well sealed. The engineers will make sure this is addressed in the final design.
<div><cite>-Aj- wrote:</cite> I know you guys have it all under control im more just curious and the forums are all but dead quiet (its like the lul before the storm) so i thought id throw you something out of interests sake.Also if, saay, the electronics <span style="font-style: italic">were</span> waterproof would the rest of the system be cool under that big puddle / small stream as i power across?</div>
Yes, it's only the electronics that are the issue. The bearings are all sealed so it's only the batteries / battery management system, controllers and motors. They don't like water ... we are doing our best to make them tolerate it at least.By the way, we suspect you are right ... the storm is coming ... once we release video of the upcoming prototype/s we are going to be slammed ... can't wait!
<div><cite>-Aj- wrote:</cite> otherwise im just gonna have to see if i can aqua plain one of these babies, i cant wait to try that!</div>
Like we said ... we cannot condone this nor cover this under warranty, however we'd really appreciate some video!Thanks for the question/s AJ.Cheers,The Scarpar TeamPosted 5 months ago #
Reply
You must log in to post.